I think I will play with this ESS Heil and the DA25TX00-08 before I go spend $480 on those suggested tweeters, Mr. Hollander. I really have too much stuff already . . . ARE YOU suggesting that the Revelator Tweeter sounds better after flattening/DSP than it does without it?
@kenrhodes said:
I love DSP but it cannot fix distortion and dispersion.
^^^ Absolutely true.
So, I make a 4 way XO with affordable drivers instead of a two way with expensive ones . . . (and wind up spending more on the 4 way design). This is a crazy hobby . . .
@Steve_Lee said:
I think I will play with this ESS Heil and the DA25TX00-08 before I go spend $480 on those suggested tweeters, Mr. Hollander. I really have too much stuff already . . . ARE YOU suggesting that the Revelator Tweeter sounds better after flattening/DSP than it does without it?
Yes a proper xo is needed regardless. I'm just pointing out that there are some nice expensive tweeters that sound better than others even with similar flat responses.
was on Emotiva's site for the black Friday's discounts - haven't been there for a few months, but looks like the prices jumped 100% or more or is this the normal pricing.
Newark currently has these TE 41290 terminals for $.064 each. I like screwing them to wooden crossover boards, and for 6.4 cents each they are handy and cheap.
I haven't tried this particular batch, but they are solid brass, and I haven't had any problem. I usually solder the one side and .25 connector on the other.
Cool looking and the price is right. Not sure about the specs - makes me think they were not broken in before he did the sweep. KRK likely used some serious EQ, he has the matching amp as well.
On and off axis sweeps look really good on those ^ SEAS drivers but the FR leaves me wondering what to do with them based upon their size, JR . . . any clues?
FWIW, I do not like the L series drivers at all. Every one I've heard has left me wanting more and better.
I know they get some high praise, and as woofers alone the effect is reduced, but they have horrible breakup and high 3rd order HD that really bother me.
Comments
I love DSP but it cannot fix distortion and dispersion.
I think I will play with this ESS Heil and the DA25TX00-08 before I go spend $480 on those suggested tweeters, Mr. Hollander. I really have too much stuff already . . . ARE YOU suggesting that the Revelator Tweeter sounds better after flattening/DSP than it does without it?
^^^ Absolutely true.
So, I make a 4 way XO with affordable drivers instead of a two way with expensive ones . . . (and wind up spending more on the 4 way design). This is a crazy hobby . . .
Yes a proper xo is needed regardless. I'm just pointing out that there are some nice expensive tweeters that sound better than others even with similar flat responses.
Cyber Monday at Parts Express. 12% off everything with CYBER12 code.
Ron
was on Emotiva's site for the black Friday's discounts - haven't been there for a few months, but looks like the prices jumped 100% or more or is this the normal pricing.
Madisound has added to their sale. I just picked up a set of SB26STCN-4 @ $24 each.
I think Brandon has a STL model waveguide for those.
Newark currently has these TE 41290 terminals for $.064 each. I like screwing them to wooden crossover boards, and for 6.4 cents each they are handy and cheap.
Do they solder well? Or are they better with just female crimp connectors?
I haven't tried this particular batch, but they are solid brass, and I haven't had any problem. I usually solder the one side and .25 connector on the other.
Solders fine
RT1C $29
https://www.madisoundspeakerstore.com/ribbon-tweeters/hi-vi-rt1c-a-isodynamic-tweeter-120mm-94db/
Remember when PE had driver sales like Mad has had for a while now?
Steve over at Apex, JR has some pretty nice 75uF caps for $3.95
https://www.apexjr.com/
He also some Axon 10" on his eBay store but not his website. They look pretty cool if you like yellow cone speakers.
I should really pull the trigger on a pair of these:
https://www.apexjr.com/images/12_INCH_KEVLAR.jpg
Cool looking and the price is right. Not sure about the specs - makes me think they were not broken in before he did the sweep. KRK likely used some serious EQ, he has the matching amp as well.
12% off at PE with code Merry12.
Ron
Good thru 12/20.
https://www.madisoundspeakerstore.com/approx-5-woofers/seas-l15rly/p-04-5-aluminum-cone-woofer-4-ohm/
https://www.madisoundspeakerstore.com/approx-4-woofers/seas-l12rcy/p-04-4.5-aluminum-cone-woofer-4-ohm/
Those Seas would be fun. I used the similar Peerless for a desktop speaker and loved the detail
On and off axis sweeps look really good on those ^ SEAS drivers but the FR leaves me wondering what to do with them based upon their size, JR . . . any clues?
I searched here, PETT, and diyaudio and didn't find much of anything on those L15RLY's. Any ideas on how good the L15RLY is, especially at $39?
FWIW, I do not like the L series drivers at all. Every one I've heard has left me wanting more and better.
I know they get some high praise, and as woofers alone the effect is reduced, but they have horrible breakup and high 3rd order HD that really bother me.
InDIYana Event Website
Anyone looking for a HT amp, Outlaw 5000x and 7000x are available with free shipping with promo code HOLIDAYSHIP.
I think the seas price is low because 4 ohm versions do not appear to be a catalog item - likely an OEM type of thing, a buyout perhaps.
Before you buy MiniDSP products from PE check the prices from MiniDSP. PE wants $300 for the 2x4 HD that MiniDSP will sell you for $225.
https://parts-express.com/miniDSP-2x4-HD-USB-DAC-Digital-Signal-Processor-230-324?quantity=1
https://minidsp.com/products/minidsp-in-a-box/minidsp-2x4-hd
Ron
Yeah but you can get a Dayton for only $160!
Here is a "fix" for their ^ funky FR/break-up (See post # 17 in the link) --> https://www.diyaudio.com/community/threads/taming-seas-metal-woofer-break-up.393645/#post-7212884
Whoa! Check out the Orion kit at Farts Express! Only $674.98
Am I missing what you get for $674?
https://www.jfcomponents.com/